Home Improvement

How to Install Kitchen Tile Backsplash.

kitchen backsplashkitchen backsplash
Sometimes tiny detailing makes a home unique. When talking about kitchen remodeling, the kitchen backsplash is always the main concern. Although, you may have a countertop that compliments the aesthetics of the kitchen, the right size and positioning of appliances that are beautifully fit in your kitchen, and sufficient lighting. However, the old backsplash can throw off the whole kitchen. By installing a gorgeously designed backsplash, you can enhance this wall space with eye-catching tiles that are both stylish and practical.
If you are wondering how to install a backsplash yourself, you are at the right place. Installing a backsplash is fun, and it can give your kitchen a justly on-the-spot facelift. Here are some tips on kitchen backspace installation to make sure that you get the installation done right. Before going toward the procedure, you must know what backsplash is.

What is a kitchen backsplash?

This is a material that fills the gaps on the kitchen wall between cabinets and countertops. It is useful to protect the wall from water, grease, and having other elements that can cause stains. It works as a protective shield on the wall. The type of material used for it should be enduring and easy to clean.

Whether you want to DIY or hire a professional for installation, it is important to have knowledge of the process. The following steps and tips will make the installation clear for you.

kitchen backsplash

1. Plan ahead:

If you are thinking of installing an ideal backsplash for your kitchen, start with complete planning. First of all, identifying the place for kitchen backsplash installation, like around the sink and stove, can enhance the aesthetics and functionality of the kitchen.
Accurately measuring the place to cover keeps you from running out of materials during the process. Measure the place of installation in square feet for this multiply the width and the length of the place. Add at least 8-10 percent for probable mistakes in case of error, cut, and waste.

2. Required Tools:

If you are going for the DIY route, you’ll need tools which are:
  • Tiles
  • Angle grinder
  • Pencil
  • Tape
  • Adhesive
  • Clean cloth
  • Grout
  • Plastic towel for grouting
kitchen backsplash
kitchen backsplash

3. Prepare the walls:

Your walls need to be prepped before installing a backsplash for smooth and uniform installation. Installation of tiles on the uneven surface causes bumps and lumps that are not ideal and fascinating. If you have an old backsplash attached, it could damage the surface of the drywall when you remove it. Fix the drywall by evening on a thin coat of wall compound with a taping knife. Let it dry entirely before going further. If there is no existing backsplash, you can just use sandpaper to smooth the surface and then vacuum the surface to wipe the dust away with a damp cloth. If you notice stains on the wall, use a deglosser and sponge to remove them. Also, remove any outlet and covers to protect them from tiling.

4. Cover countertop, appliances, and floor:

Save your kitchen from getting messy by covering countertops, floors, and appliances with plastic sheets or drop cloths. That’s the way you can save your kitchen from getting stained and destroyed.

5. Design the tile layout:

Accurately measure the dimensions of the tile backsplash and make a chalk line on the wall to show the top and side edges. Normally, a backsplash extends 4 inches above the countertop, which is a suitable lowest height for protecting your wall from splashes and grease. However, modern kitchens create a taller backsplash for stylish appearances.

6. Tiles cutting:

You may need to cut some tiles with a tile cutter to fit them around the switches and outlets. If tiles butt up against the cabinets, they’ll need little trim to fit.

7. Start Tiling:

Apply a high-quality adhesive starting at the bottom to the wall. Don’t forget to add a reasonable and uniform layer of adhesive using a saw-toothed blade. Then carefully install the tiles, starting from the bottom row and going upward. As you designed a layout on the wall, now you only have to pick up a tile and put it in the right spot on the wall. Press the tiles strongly against the adhesive. Clean out the excess adhesive before it dries.
kitchen backsplash
kitchen backsplash

8. Apply Grout:

Evenly apply the grout to the surface of the tiles with the trowel and evenly. Generously push the grout into the grout lines and make sure that grout lines are smooth and even. Remove excess grout with a damp towel before it dries. Grout comes in eight different shades, so you can create a customized and contract look with your tiles.
9. Clean the tiles:
After removing excess grout, wipe the surface of backsplash tiles with a clean damp sponge. Wipe any dried grout from the surface of tiles in a circular motion. The sponge will quickly pick up the grout and clean the tiles.
After kitchen backsplash installation, you need it to have a clean look. Usually, backsplashes do not need a lot of care and preservation, but using the wrong cleaning agents can damage them.

Leave a Reply